Incubator Analyzer CO2 & O2 | USA NIST Calibration

Incubator Analyzer CO2 & O2 | USA NIST Calibration

Features: 

• INCUBATOR ANALYZER: CO2 (NDIR sensor) and O2 (electrochemical sensor) incubator analyzer. Comes FACTORY-CALIBRATED. Turn ON and GO.
• COLOR: Color screen and graph functions allow for intuitive operation.
• DATA LOGGING: USB recharging and real-time computer data acquisition. 
• STRONG: Robust design constructed with high-strength ABS and anti-slip grip rubber. Water-resistant, dust-proof, and explosion-proof.
• TRUSTWORTHY: ** 1-year limited warranty ** Arrives with USA NIST calibration certificates ** Product tested and verified in the USA ** 

Details: Our incubator analyzer detects CO2 and O2 gas and is the perfect solution to an easy-to-use incubator analyzer for incubator gas level verification. This unit will verify the O2 and CO2 levels in your incubator to make sure your incubator is operating to specifications. Based on our industrial analyzer platform, this analyzer includes a built-in pump that is easy to use and very portable. Insert the tube into your incubator sample port and the other end into the analyzer. Within 60 seconds, you will be able to determine the levels of O2 and CO2 in your incubator. Comes with a color screen, large digits, and on-screen real-time graphing. The detector is constructed with an advanced electrochemical oxygen sensor. The internal 32-bit microprocessor allows for user calibration, ON/OFF flow, and test control. 

Which CO2 Gas Monitor shall I purchase for my incubator?

It all depends on your incubator. For example: 

1. If your incubator has a sample air port, this is the best. You must sample the air from the air port (usually a barb port 1/4 or 1/8 inch is provided). Confirm that air is under positive pressure and the air is being expelled by the port. If the incubator is pressurized and air flows out of the port, the FD-90A-CO2 (10%) with work and will be the best. Run a tube from the incubator sample port to the gas calibration cap and attach the cap to the  FD-90A-CO2 (10%). When testing CO2, ensure the incubator humidity is as low as possible (to reduce cross interference with CO2 error) and set the temperature to 70F.
2. If the incubator is not pressurized, and no air is being expelled from the air nipple or barb, then you need the FD-600-CO2 or FD-600-CO2-O2-INC (with oxygen). This analyzer has a built in pump and will draw the air from the incubator to the analyzer. When testing CO2, ensure the incubator humidity is as low as possible (to reduce cross interference with CO2 error) and set the temperature to 70F.
3. Lastly, if your incubator has a glass window door, you can use the FD-90A-CO2 (10%), and place the CO2 monitor in the incubator. When testing CO2, ensure the incubator humidity is as low as possible (to reduce cross interference with CO2 error) and set the temperature to 70F.

Included: Incubator analyzer and magnet back, English user manual, USA NIST calibration certificate, USB charging cable, Tube and Barb Coupler, charger, and tubing.

Specifications: